subie 2.2 timing covers

If it makes power or helps it get to the wheels this is where it is at

Moderator: manxiberty

billy1770
Newbie
Newbie
Posts: 24
Joined: Thu Mar 29, 2012 12:05 am
Location: Agnes Water/1770 Qld

subie 2.2 timing covers

Postby billy1770 » Thu Jun 19, 2014 5:44 pm

Hi all.

My 96 liberty donor had an incident involving a cow....soooo it will need some timing cover plastics...
does any one know if there are aftermarket ones available?
I can get some from the wreckers, that are shabby and cost as much as the motor again....
Will also need a cam sprocket for passenger side.

Cow versus car... know body wins!!

thanks in advance
I'm not completely useless...
I can be used as a bad example !!!
User avatar
Brad
Manx Club Member
Manx Club Member
Posts: 3081
Joined: Tue Nov 30, 1999 10:00 am
Location: SOCAL, USA
Contact:

Re: subie 2.2 timing covers

Postby Brad » Sat Jun 21, 2014 5:30 pm

No aftermarket that I know of BUT I would check the cost of new ones as they use to be less than $200 for the set from Subaru.
Brad
Meyers Manx Australia
www.meyersmanx.com.au
Burto
Newbie
Newbie
Posts: 33
Joined: Sat Aug 17, 2013 7:32 am

Re: subie 2.2 timing covers

Postby Burto » Tue Jun 24, 2014 11:20 am

I recently got some new genuine ones and they came to about $350 with new gaskets.
billy1770
Newbie
Newbie
Posts: 24
Joined: Thu Mar 29, 2012 12:05 am
Location: Agnes Water/1770 Qld

Re: subie 2.2 timing covers

Postby billy1770 » Fri Jul 04, 2014 12:39 pm

Thanks Brad and Burto.

looked at both options and new are about 30% dearer then secondhand. Add freight from the wreckers and the prices are just about the same. That's in my case as I'm a little remote. So new would get the nob unless and can scam a trip going past my Subaru wreckers on the coast....Mmmmm.
I'm not completely useless...
I can be used as a bad example !!!
User avatar
ttriebler
Manx Jnr
Posts: 276
Joined: Tue Nov 30, 1999 10:00 am
Location: Sydney, Australia
Contact:

Re: subie 2.2 timing covers

Postby ttriebler » Sat Jul 05, 2014 10:35 am

I've got a ton of these. Do you want me to send you up a set?
Reversed gears for Subaru Transmissions
Fit a 5 apeed to your rear engined car
www.subarugears.com
billy1770
Newbie
Newbie
Posts: 24
Joined: Thu Mar 29, 2012 12:05 am
Location: Agnes Water/1770 Qld

Re: subie 2.2 timing covers

Postby billy1770 » Sun Jul 13, 2014 7:33 pm

Hey Todd. sounds good....I'll PM you some photo's so we can make sure they are same.. There is no urgency for them, so may get them sent up with my new subie gears....

Thanks again

Billy1770.
I'm not completely useless...
I can be used as a bad example !!!
User avatar
ttriebler
Manx Jnr
Posts: 276
Joined: Tue Nov 30, 1999 10:00 am
Location: Sydney, Australia
Contact:

Re: subie 2.2 timing covers

Postby ttriebler » Tue Jul 15, 2014 10:27 pm

New Subarugears? You've already got one set! Are you building a second car?
Reversed gears for Subaru Transmissions

Fit a 5 apeed to your rear engined car

www.subarugears.com

Return to “Engine and Driveline”

Who is online

Users browsing this forum: No registered users and 8 guests