Questions for Myers Manx Australia?

Ask the guys that build buggies for a living questions on their services and products.

Moderators: MAXFX, Brad

User avatar
Lovebuggy
Manx Club Member
Manx Club Member
Posts: 1639
Joined: Tue Nov 30, 1999 10:00 am
Location: Brisbane

Questions for Myers Manx Australia?

Postby Lovebuggy » Sat Jan 08, 2011 3:37 am

Want to know something about Myers Manx Australia? Ask it here.
Last edited by Lovebuggy on Sat Jan 08, 2011 4:01 am, edited 1 time in total.
Are you a financial member of the club??

Go to "http://www.manxclub.org/phpbb3/viewtopic.php?f=50&t=1667" and sign up today.
User avatar
Brad
Manx Club Member
Manx Club Member
Posts: 3081
Joined: Tue Nov 30, 1999 10:00 am
Location: SOCAL, USA
Contact:

Re: Questions for Myers Manx Australia

Postby Brad » Sat Jan 08, 2011 3:53 am

Lovebuggy wrote:I am impressed with the front Bar being put on Daves Blue Buggy? How much does one of those cost and what options can I get with them including prices?


Front Bars are $395 in bare finish as shown below.
Image

The bar comes with two custom spot light tabs, inner bash plate mounting flanges, twin recovery hook mounting plates and are raw steel or quickly painted with a presure pack to stop surface rust.
Brad
Meyers Manx Australia
www.meyersmanx.com.au
User avatar
Brad
Manx Club Member
Manx Club Member
Posts: 3081
Joined: Tue Nov 30, 1999 10:00 am
Location: SOCAL, USA
Contact:

Re: Questions for Myers Manx Australia

Postby Brad » Sat Jan 08, 2011 3:56 am

Options:

3mm Alloy Bash Plate and fitting kit - $110
Image

10 000 LBS Recovery Hook kit - $22 ea
Image

Coming soon I Beam towing bars and mounting kits so you can legally tow your Manx behind your car like a trailer
Brad

Meyers Manx Australia

www.meyersmanx.com.au
User avatar
finchy
Manx Club Member
Manx Club Member
Posts: 351
Joined: Tue Nov 30, 1999 10:00 am
Location: Biddaddaba Australia
Contact:

Re: Questions for Myers Manx Australia?

Postby finchy » Sun Jul 03, 2011 11:42 am

Hi Brad, Reckon I may need one of these for trip to tip. How do I go about it
User avatar
Lovebuggy
Manx Club Member
Manx Club Member
Posts: 1639
Joined: Tue Nov 30, 1999 10:00 am
Location: Brisbane

Re: Questions for Myers Manx Australia?

Postby Lovebuggy » Sun Jul 03, 2011 6:14 pm

These will be available through Meyers Manx Australia online shop. They are a standard fit that just bolts straight on to your buggy.
Are you a financial member of the club??

Go to "http://www.manxclub.org/phpbb3/viewtopic.php?f=50&t=1667" and sign up today.
User avatar
SonicBoomAu
Manx Club Member
Manx Club Member
Posts: 133
Joined: Tue Nov 30, 1999 10:00 am
Location: Wodonga, Victoria

Re: Questions for Myers Manx Australia?

Postby SonicBoomAu » Sun Jul 03, 2011 8:23 pm

They look nice :)
User avatar
finchy
Manx Club Member
Manx Club Member
Posts: 351
Joined: Tue Nov 30, 1999 10:00 am
Location: Biddaddaba Australia
Contact:

Re: Questions for Myers Manx Australia?

Postby finchy » Fri Jul 08, 2011 7:49 pm

Any idea on weight with bash plate
User avatar
Brad
Manx Club Member
Manx Club Member
Posts: 3081
Joined: Tue Nov 30, 1999 10:00 am
Location: SOCAL, USA
Contact:

Re: Questions for Myers Manx Australia?

Postby Brad » Fri Jul 08, 2011 10:04 pm

finchy wrote:Any idea on weight with bash plate


No idea at all :roll: I would say around 15 - 20kg but when we finish our next batch I will weigh it for you complete.
Brad

Meyers Manx Australia

www.meyersmanx.com.au
User avatar
rookie
Newbie
Newbie
Posts: 122
Joined: Tue Nov 30, 1999 10:00 am
Location: Brisbane northside

Re: Questions for Myers Manx Australia?

Postby rookie » Mon Aug 08, 2011 11:29 pm

Hey Brad what is the finish like on the classic manx swb? Do you think there is many hours prep work for the painter? Do you have any contacts that can do a metalflake paintjob? I'm thinking of starting with a new body. Also i asked in another thread about picking items up as you dont have a shopfront as such is this possible ?
User avatar
Brad
Manx Club Member
Manx Club Member
Posts: 3081
Joined: Tue Nov 30, 1999 10:00 am
Location: SOCAL, USA
Contact:

Re: Questions for Myers Manx Australia?

Postby Brad » Mon Aug 08, 2011 11:40 pm

rookie wrote:Hey Brad what is the finish like on the classic manx swb? Do you think there is many hours prep work for the painter? Do you have any contacts that can do a metalflake paintjob? I'm thinking of starting with a new body. Also i asked in another thread about picking items up as you dont have a shopfront as such is this possible ?



Hi,

The finish is ok and as for prep work I would say a lot less than most cars. I have a guy who will paint it in any finish you want from where it is now for no more than $1800. He uses only the best paint products out there and his work is second to none. If you wanted a simple ie solid colour paint job it would be cheaper.

I have one in my shed at the moment getting built which you are welcome to come and check out. PM or email me your phone number and I will give you a ring to arrange.

Pickup is not an issue .
Brad

Meyers Manx Australia

www.meyersmanx.com.au
User avatar
BlueV2
Buggy Addict
Posts: 843
Joined: Tue Nov 30, 1999 10:00 am
Location: Burpengary, Brisbane

Re: Questions for Myers Manx Australia?

Postby BlueV2 » Tue Aug 09, 2011 1:24 pm

$1800 is a good price for a complete paint job.
User avatar
Brad
Manx Club Member
Manx Club Member
Posts: 3081
Joined: Tue Nov 30, 1999 10:00 am
Location: SOCAL, USA
Contact:

Re: Questions for Myers Manx Australia?

Postby Brad » Tue Aug 09, 2011 6:19 pm

BlueV2 wrote:$1800 is a good price for a complete paint job.



More so when you see the quality of his work. He will be painting MMA Manx-1 in the next month or so.
Brad

Meyers Manx Australia

www.meyersmanx.com.au
User avatar
rookie
Newbie
Newbie
Posts: 122
Joined: Tue Nov 30, 1999 10:00 am
Location: Brisbane northside

Re: Questions for Myers Manx Australia?

Postby rookie » Tue Aug 09, 2011 9:48 pm

pm sent
User avatar
Smiley
Manx Club Member
Manx Club Member
Posts: 971
Joined: Tue Nov 30, 1999 10:00 am
Location: Yeppoon, Central Queensland

Re: Questions for Myers Manx Australia?

Postby Smiley » Sun Aug 21, 2011 3:27 pm

Hey people.

I've just bought one of your Delrin rear bushing kits. (http://www.meyersmanx.com.au/DELRIN-BUS ... -P126.aspx)

Going to fit them to the vehicle very soon, just wondering if they need any lube on them? And if so what kind??

Cheers.



Smiley :)
User avatar
Brad
Manx Club Member
Manx Club Member
Posts: 3081
Joined: Tue Nov 30, 1999 10:00 am
Location: SOCAL, USA
Contact:

Re: Questions for Myers Manx Australia?

Postby Brad » Sun Aug 21, 2011 10:16 pm

Smiley wrote:Hey people.

I've just bought one of your Delrin rear bushing kits. (http://www.meyersmanx.com.au/DELRIN-BUS ... -P126.aspx)

Going to fit them to the vehicle very soon, just wondering if they need any lube on them? And if so what kind??

Cheers.



Smiley :)


Just use some grease when fitting, make sure your sleeves are clean and wack them in. Delrin is sort of self lubricating
Brad

Meyers Manx Australia

www.meyersmanx.com.au

Return to “Questions for Buggy Shop Builders”

Who is online

Users browsing this forum: No registered users and 0 guests